Êîä òîâàðà: 536-999
Çàêàçàòü Çàêàçàòü çâîíîêe-mail:
info@plcsystems.by
Õàðàêòåðèñòèêè
Item
|
I-7565-H1
|
I-7565-H2
|
Hardware | ||
CAN Port Channels |
1
|
2
|
CAN Interface | ||
Transceiver |
NXP 82C250
|
NXP 82C250
|
Connector |
9-pin D-sub connector
|
10-pin terminal-block connector
|
Baud Rate (bps) |
5K ~ 1Mbps or User-defined baud rate
|
5K ~ 1Mbps or User-defined baud rate
|
Isolation |
3000VDC for DC-to-DC
2500Vrms for photo-couple |
3000VDC for DC-to-DC
2500Vrms for photo-couple |
Terminator Resistor |
Selectable 120Ω terminator resistor by jumper
|
Selectable 120Ω terminator resistor by jumper
|
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
Pin Assignment |
C.I.A. DS-102 (CAN_H=7, CAN_L=2)
|
(CAN1: CAN_H=4, CAN_L=2 ) /
(CAN2: CAN_H=9, CAN_L=7 ) |
Receive Buffer |
256 data frames
|
128 data frames for each CAN port
|
Max Data Flow |
3000 fps
|
3000 fps (Total CAN ports)
|
USB Interface | ||
Connector |
USB Type B
|
USB Type B
|
Transmission speed |
12M kbps
|
12M kbps
|
Specification |
USB 1.1 and USB 2.0 standard
|
USB 1.1 and USB 2.0 standard
|
Receive Buffer |
100 data frames
|
100 data frames
|
LED | ||
Round LED |
PWR / RUN /ERR LED
|
PWR / RUN /ERR LED
|
Software | ||
Driver |
Windows 2K/XP, Linux
WinCE (available soon) |
Windows 2K/XP, Linux
WinCE (available soon) |
Power | ||
Power supply |
By USB interface
|
By USB interface
|
Power Consumption |
1.5 W
|
1.5 W
|
Dip Switch |
Init (Firmware Update) /
Normal (Firmware Operation) |
Init (Firmware Update) /
Normal (Firmware Operation) |
Mechanism | ||
Installation |
DIN-Rail
|
DIN-Rail
|
Dimensions |
108mm x 72mm x 35mm (H x W x D)
|
108mm x 72mm x 35mm (H x W x D)
|
Environment | ||
Operating Temp. |
-25 ~ 75 ℃
|
-25 ~ 75 ℃
|
Storage Temp. |
-30 ~ 80 ℃
|
-30 ~ 80 ℃
|
Humidity |
10 ~ 90% RH, non-condensing
|
10 ~ 90% RH, non-condensing
|
Êîíòàêòû ïðîäàâöà
Àäðåñ:
220072, Áåëàðóñü, Ìèíñêàÿ îáë., Ìèíñê, óë. Ïåòðóñÿ Áðîâêè, 19 - îô. 438
Ñîîáùèòå ïîñòàâùèêó, ÷òî íàøëè åãî íà EnergoBelarus.by